Flooring coatings group
Saba’s flooring coatings group is divided into two groups.
The first one, is designed and formulated based on epoxy resin and solvent-free polyamine hardener.
This products group is ideal for covering floors of workshops or warehouses in food industries, chemical industries, textile and pharmaceutical industries, electrical industries, military industries, hospitals, airports, factories, sports halls and other industrial environments.
Advantages of this products group: self-leveling, good adhesiveness on the concrete surface, beautiful surfaces and ease of cleaning, suitable abrasion and mechanical resistance, stability against all kinds of chemicals, hydraulic oils, diesel, acids, alkalis and water.
The second one, is designed and formulated based on methyl methacrylate resin (MMA).
This product is an ideal flooring coating for places that have very high temperature fluctuations and stress, high traffic, and cannot stop or shut down.
Advantages of this products group: very fast curing (20-30 minutes), application at low temperatures, even negative, low maintenance cost, stability against UV, very high adhesion to surfaces, resistance to abrasion, pressure and temperature, minimum shrinkage during curing and as a result reducing possible cracks in the surface.
Product | Technical Code | Application |
Polyamide epoxy primer (special for concrete surfaces) | L3100 | This product is used to saturate the porous concrete surfaces and while protecting the concrete, it increases the adhesion of the next layers of the flooring system. |
Polyamine epoxy mastic | XF3210 | This product is applying on concrete primer and is used for infrastructure operations such as filling concrete cracks and voids up to 5 mm deep and masticating surfaces. |
Polyamine epoxy middle flooring coating | FIF3210 | This product has the general properties of epoxy flooring, such as abrasion, mechanical and chemical resistance, and is designed in such a way that its purpose is to make the implementation of flooring cost-effective. |
Polyamine epoxy top flooring coating | FF3210 | In addition to making the surface beautiful and easy to clean, this product prevents the creation of pollution and dust caused by the wear of concrete surfaces and is also very resistant to chemical corrosive agents, mechanical stresses and temperature changes. |
Phenolic epoxy flooring coating | FF3410 | Due to its excellent resistance to chemicals, this product is a suitable choice for concrete floors of workshops or warehouses of chemical industries, textile and pharmaceutical industries and other industrial environments. |
Polyamide antistatic epoxy primer | P3110 | This product is used to establish the copper tape network and strengthen the transfer of electric charge before applying antistatic flooring. |
Polyamide antistatic epoxy top coat | FAF3210 | The special feature of this flooring is the non-accumulation of static electric charge and discharge to the earth in order to establish safety in environments such as production halls and warehouses of food, chemical, electronic industries, gas stations, etc., where there is a possibility of sparking due to static electricity. |
MMA primer flooring coating | MKP | This product is used to saturate the porous concrete surfaces and while protecting the concrete, it increases the adhesion of the next layers of the flooring system. |
MMA middle flooring coating | MKM | This product, having the general properties of MMA flooring, is used as a thickener and filler for seams and voids on the surface. |
MMA top flooring coating | MKT | In addition to making the surface beautiful and easy to clean, this product prevents the creation of pollution and dust caused by the wear of concrete surfaces and is also very resistant to chemical corrosive agents, mechanical stresses and temperature changes. |