Decorative paints and varnish

Water-Based Paints

Water-Base Acrylic Paints

LETO acrylic paint is produced using the best water-base  acrylic resins, and, it is used for fast, beautiful and durable painting of interior and exterior surfaces, namely plaster, cement, concrete, brick, cement composition panels, wood.

properties:  Washability, excellent coatability, high drying rate, ease of use and water-thinnable, lack of odor and dust absorption, resistance to abrasion, sunlight and ultraviolet light, and environmentally friendly. This paint contains the following types:

• Gloss Acrylic paint
• Semi-gloss Acrylic paint
• Matt Acrylic paint
• Acrylic primer (LETO Primin)
• Acrylic facade paint
• Acrylic texture paint

Technical details:

Theoretical covering:               

• Acrylic interior paint: 9-11 m²/L
• Acrylic facade paint 3-4 m²/L
• Texture paint: 1-1.5 m²/L

Surface drying time: maximum 1 h

Time to apply the next layer: minimum 3 h

color: white (could be prepared in different colors)

Directions: Rinse the surface with water to remove dust. Clean  off  any contaminants, oil and even old paint from the surface before painting it. Apply waterjet solution for cement surfaces, and before applying the paint, make sure the surface is dried out completely. Use acrylic sealer to give a smooth surface if required. Mix LETO acrylic paint (except acrylic texture paint) with sufficient water and apply it on the surface (water to paint ratio is 15-20% for brush, 10-15% for roller and 20-25% for airless spray based on weight percentage). Water to paint ratio for texture paints is 5% for rollers.

Cardboard Box Packaging: Quart (6×1), Gallon (4×1), 2.5 Gallons , 5 Gallons

Water-Base Vinyl Emulsion Paint

LETO matt vinyl emulsion paint is produced based on polyvinyl acetate resin. It is used for indoor surfaces (plaster, cement, concrete, cement composition panels and wood).

Among advantages of this paint are its excellent coatability, fast drying, good brushability, water-thinnable, perfect adhesiveness, easy application, lack of odor and being environmentally friendly. This paint contains the following types:

• LETO matt full-vinyl emulsion paint
• LETO LUXE matt semi-vinyl emulsion paint
• LETO MAX matt semi- vinyl emulsion paint
• Textured emulsion paint

color: white (could be prepared in different color)

Technical details:

Theoretical covering: 8-10 m²/L

Surface drying time: maximum 1 h 

Time to apply the next layer: minimum 3 h

Directions: Before painting, remove loose parts, opening cracks and shelled paint to make the surface ready for painting. Then, if required, smooth the surface using plaster or primer, and then apply sanding. The surface should be cleaned off contamination, dust or oil before being painted. Then, gradually mix LETO  vinyl emulsion paint with sufficient water and apply it on the surface (water to paint ratio is 25-30% for brush, 5-10% for roller and 35-40% for airless spray based on weight percentage).

Cardboard Box Packaging: Quart (12×1), Gallon (4×1), 2.5 Gallons, 5 Gallons

Alkyd Paints

Alkyd resin-based       paint is produced based on the latest formulation available in the paint industry. It has a good drying time, gloss, adhesion and coatability with great durability against climatic conditions and compatibility with different weathers. This paint covers the following types:

• Gloss Alkyd paint
• Semi-gloss Alkyd paint
• Matt Alkyd paint
• Alkyd Primer

color: Prepared in different colors

Technical details:

• Theoretical covering: 10-11 m²/L
• Surface drying time: maximum 4 h
• Time to apply the next layer: minimum 16 h
• Flashpoint: 38 °C

Directions: First, clean off any oil, dust, rust and other contaminations from the surface. Cover the surface with primer or suitable alkyd primer to give a smooth surface if required. Shake the paint well, and then, thin it to the intended concentration using oil thinner. Then, apply it by a brush, roller or airless spray (thinner ratio is 15-20% for brush, 10-15% for roller and 20-25% for airless spray based on weight percentage).

Cardboard Box Packaging: Quarter (25×1), Quart (12×1), Gallon (4×1), 5 Gallons (1×1)

Alkyd Antirust Primer

Alkyd resin-based antirust paint is produce d using  the best abrasion-resistant  materials. It is applied as the primer on metal surfaces or the alike, which is of good adhesiveness and durability. The product has good drying time, durability, coatability and adhesiveness, and it is resistant against corrosion, abrasion and climatic factors.

color: Ocher, gray, blue, green (could be prepared in different colors)

Technical details:

• Theoretical covering: 9-11 m²/L
• Surface drying time: maximum 4 h
• Time to apply the next layer: minimum 16 h
• Flashpoint: 38 °C

Directions: First, clean off any oil, dust, rust and other contaminations (sanding sealer or sandblasting is recommended to remove the old paint, rust and for better adhesiveness). Then, shake the can well and thin it to the intended concentration using oil thinner and apply it using a brush, roller or a airless spray (thinner ratio is 12-15% for brush, 10-12% for roller and 15-20% for airless spray based on weight percentage)

Cardboard Box Packaging: Quart (12×1), Gallon (4×1), 5 Gallons (1×1)

Gloss Alkyd Varnish 

This lacquer is recommended to be applied on all indoor wood surfaces including furniture, cabinets, doors and the alike. The lacquer exhibits good drying time and good resistance to abrasion. In addition, is has perfect adhesiveness, which prevents air penetration into the topcoat.

color: Transparent 

Technical details:

• Theoretical covering: 15-14 m²/L
• Surface drying time: maximum 4 h
• Time to apply the next layer: minimum 16 h
• Flashpoint: 38 °C

Directions: First, clean off any oil, dust, rust and other contaminations from the surface. Old shelled paint should be removed to obtain a smooth surface. If required, use sanding or a brush to remove old shelled paint. Then, mix the paint and thin it to the intended concentration using oil thinner. Then, apply it by a brush, roller or airless spray (thinner to paint ratio is 30-35% for brush, 20-25% for roller and 45-50% for airless spray).

Cardboard Box Packaging: Quarter (25×1), Quart (12×1), Gallon (4×1), 5 Gallons (1×1)

Pool Paint

Swimming pool paint is an acrylic resin-based water-resistant and fast drying paint, which has a good resistance to stroke and abrasion in addition to its high adhesiveness on concrete, brick and cement surfaces. This is recommended  to paint swimming  pools and freshwater tanks. Among properties of this product are their resistance to aqueous environments, good drying time, and perfect coatability, resistance to abrasion, stroke, sunrays and ultraviolet radiation.

color: White-blue (could be prepared in different colors)

Technical details:

• Theoretical covering: 9-10 m²/L
• Surface drying time: maximum 1 h
• Time to apply the next layer: minimum 24 h
• Flashpoint: 38 °C

Directions: First, fill the pool to the capacity and discharge it after 2 weeks to remove all alkali salts from the concrete. Then, clean the surface with a wire brush. Paint should be applied under the sun after full drying. Thin the paint with a good portion of thinner and paint the pool to fill all pores. The next layer is applied the following day. Thinner to paint ratio depends on the ambient temperature, the surface, and the painting tool (thinner to paint ratio is 20-25% for roller and 45-50% for airless spray based on weight percentage).

Cardboard Box Packaging: Quart (12×1), Gallon (4×1), 5 Gallons (1×1)