Cold Acrylic Paint/ Alkyd Chlorinated Paint

It is an acrylic thermoplastic resin/alkyd chlorinated -based product used for road marking and drawing horizontal traffic signs. The paint could not be executed in thicknesses more than 700  μm (wet) due to the solvent used in the paint (percent solids by weight at least 70%). When it dries out and the solvent evaporates, a 350 μm (dry) thickness is left considering the percent solids by weight of about 50% (a measure of reduced thickness of the paint when it dries out). Along with this product, to reduce viscosity (to thin the paint), the specialized thinner of Mandegar road marking paint could be used (using other thinners is not recommended due to the possibility of incompatibility or a negative effect on the paint durability). It is worth mentioning that alkyd chlorinated resin-based paints are more resistant in hot and humid climates relative to acrylic resin-based paints. This product is recommended for asphalt surfaces with good granularity. For other surfaces like cement, metals, etc. please refer to the experts of Mandegar Paint.

Hot-melt thermoplastic paint (spray, extrusion)

The product is hydrocarbon resin-based to be used in traffic line marking  The converted form is a mixture of solids including resin granules, pigment powders, fillers and additives. The mixture is applied as melted on asphalt, and a homogeneous film with high viscosity is formed on asphalt.

Of advantages of this product over other thermoplast resin-based paints is that it could form a film of high thickness, with a much longer life span and a much lower drying time (less than five minutes), which is considered to be a cost-effective product for the reverend employers.

Two-component 98:2 cold plastic paint (spray, extrusion machine applied)

The product is an acrylic resin-based paint used in road line marking and drawing horizontal traffic signs. This paint could be applied in any thickness due to its lack of solvent (percent solids by weight of about 98%) which reduces operational costs considering the paint durability.

This product is a two-component paint the major component of which, i.e. A is liquid and component B (hardener) is provided as a white paste for the customers.

This product is recommended for asphalt surfaces with good granularity. For other surfaces like cement, metals, etc. please refer to the experts of Mandegar Paint.

Two-component 98:2 cold plastic paint (manual applied)

It is an acrylic resin-based paint used in traffic marking and drawing horizontal traffic signs. This paint could be applied in high thicknesses due to the lack of solvent (percent solids by weight of about 98%) which reduces operational costs considering the paint durability.

This product is a two-component paint the major component of which, i.e. A is liquid and component B (hardener) is provided as a white powder for the customers.

This product is recommended for asphalt surfaces with good granularity. For other surfaces like cement, metals, etc. please refer to the experts of Mandegar Paint.

Multi-component paints (two-component, three-component, hand-applied)

It is an acrylic resin-based paint used in traffic marking and drawing horizontal traffic signs. This paint could be applied in high thicknesses due to the lack of solvent (percent solids by weight of about 98%) which reduces operational costs considering the paint durability.

In three-component paints, there are two components of B and C along with the main component in which component B is a yellow liquid and component C is a white powder or paste. In two-component paints only the component C or the hardener is provided separately for the customers. Considering the reaction occurred in this paint (high-speed radical exothermic reaction), high experience and sufficient skill is required to apply the paint.

This product is recommended for asphalt surfaces with good granularity. For other surfaces like cement, metals, etc. please refer to the experts of Mandegar Paint.

 Two-Component Epoxy Adhesive

This is an epoxy resin-based product designed to adhere traffic signs and equipment to the asphalt and concrete surfaces. Considering the time limit in applying traffic equipment, low drying time of adhesive is of special importance while providing good mechanical properties. With the special design of this product considering all good mechanical properties, the drying time is reduced significantly and the certificate obtained from Iran Road Maintenance & Transportation Organization of the Ministry of Roads & Urban Development verifies it. Along with the main component (adhesive), another component called hardener, which is a brown liquid, is customized for the customers and in case of being mixed well, they will present good physical and mechanical properties.  This product is recommended to be used for asphalt and concrete surfaces. For other surfaces, please refer to the experts of Mandegar Paint.

Alkyd/ Polyurethane Curbing Paint

It is a alkyd / polyol resin-based and isocyanate hardener designed to paint concrete and steel surfaces. This paint is of good brushability and of acceptable adhesiveness when being applied to concrete and steel surfaces. To reduce viscosity (to dilute the paint), the specific Mandegar alkyd paint thinner/ Mandegar polyurethane thinner could be used. (It is not recommended to use other thinners due to the incompatibility or having a negative effect on paint durability).

Epoxy Mortar Flooring

It is an epoxy resin-based product designed for pedestrian crossing paint, bus stops, taxi stands, vibration lines, sloping surfaces, entrance to the tollway, asphalt speed bumps etc.

This paint could be applied in any thickness due to the lack of solvent, which reduces operational costs considering the paint durability

It is provided in five components for the customers. Component A is the polyamine industrial primer presented along with the component B (special hardener). Component C is the polyamine epoxy paint provided along with the hardener, component D, to be mixed with component E, and silica.

This coating, which is fully saturated using silica, creates a highly resistant surface using a highly adhesive formulation. Prominent features of this coating are the assorted coloring, variety of design, and its resistance to sunlight and high radiation.