Product

Technical Code

Curing agent

Application

Zinc-Phosphate Epoxy Primer

P3101

Polyamide

The anti-corrosion mechanism of this primer is Active type and is used to protect metal structures in submerged and atmospheric C2, C3, C4 and C5 environments.

Zinc-Chromate Epoxy Primer

P3102

Polyamide

The anti-corrosion mechanism of this primer is Active type and is used to protect metal structures in atmospheric C2, C3, C4 and C5 environments.

Zinc-Rich Epoxy Primer

P3103

Polyamide

The anti-corrosion mechanism of this primer is of sacrificial anode protection and according to the percentage of zinc in the product’s dry film, it is used as the first layer on steel surfaces in C2, C3, C4 and C5 atmospheric environments.

Iron Oxide Epoxy Primer

P3106

Polyamide

The anti-corrosion mechanism of this primer is Active type and is used to protect construction facilities and metal structures in atmospheric C2, C3, C4 and C5 environments.

Phenolic Epoxy Primer

P3410

Polyamine

This primer, with high anti-corrosion properties and chemical resistance, can be used for the internal and external surfaces of all types of structures in the refinery, petrochemical, crude oil, gasoline, dilute alkali and acid solution tanks, anti-ice, hot water and some aliphatic solvents.

Epoxy Sealer

S3106

Polyamide

This coating can be used as a sealer/tie coat in industrial and marine systems on all kinds of epoxy and zinc silicate primers, and due to its ability to be applied in thin thicknesses, it prepares the porous surface of the lining for applying of middle coat. Due to the absence of metal pigments, this coating can also be used as a suitable primer for stainless steel surfaces.

Surface tolerant Epoxy Primer/Coating

EX3204

Polyamine

The formulation of this product is designed based on Masterbond/ Surface tolerant technology and its special application is for surfaces that cannot be properly prepared by roughing with abrasive particles (blasting method). Other features include proper drying and adhesion on wet surfaces.

High Build Epoxy Primer/Coating

 (For drinking water)

XH3210

Polyamine

This product has high chemical, abrasion and moisture resistance and shows good resistance against cathodic separation in systems that are under cathodic protection. Not affecting the taste of drinking water is one of the other properties of this product.

High Build Epoxy Primer/Coating

E3203

Polyamine

This product can be applied in a dry film thickness of 200 microns to cover all types of metal and concrete surfaces, including structures, pipes, internal surfaces of tanks and equipment in petrochemical industries, refineries, power plants, factories, drilling rigs, oil platforms, Marine industries and other industrial facilities are used.

Epoxy Primer/Enamel

EH3110

Polyamide

This product can be used on all types of metal and concrete surfaces, has excellent abrasion, mechanical and chemical resistance and protects the surfaces from corrosive agents. This product is a self-primer and can be produced in various colors and glossiness.

Phenolic Epoxy Primer/Enamel

T3410

Polyamine

This product with high chemical resistance and anti-corrosion properties, can be applied on metal structures, concrete and internal and external surfaces of all types of structures in refinery, petrochemical, crude oil tanks, gasoline, alkali solution, dilute acid, anti-ice, hot water and some aliphatic solvents.

High Build Epoxy Middle Coating

IH3110

Polyamide

This product can be used as an intermediate layer in industrial and marine systems on all kinds of epoxy and zinc silicate primers, and due to its ability to be applied in high thicknesses, in addition to protecting the primer layer by creating a barrier effect, it prolongs the life of the paint system.

MIO Pigmented Epoxy Coating, HB

I3104

Polyamide

Using  MIO flake pigments in this coating creates barrier properties against moisture, oxygen and corrosive factors, and also increases wear resistance, resistance to erosion factors and mechanical stresses.

Coal tar Epoxy Primer/Coating

X3710

Polyamide

This self-primer product, after complete curing, creates a film with very high chemical resistance, which protects the substrate against chemical and atmospheric corrosive factors. One of the important properties of this product is excellent adhesion, resistance to humidity and environments immersed in sea water and chemicals, buried in soil, as well as high hardness and flexibility.

Coal tar Epoxy Primer/Coating

X3810

Polyamine

This self-primer product, after complete curing, creates a film with very high chemical resistance, which protects the substrate against chemical and atmospheric corrosive factors. One of the main properties of this product is its application in high thicknesses up to 500 microns in a single layer.

Glass flake Epoxy Primer/ Coating

XF3209

Polyamine

In this product, due to the use of glass flake pigment, the barrier property is very high, and therefore, resistance to moisture penetration is one of the main features of this product. Another outstanding property of this coating is its excellent chemical resistance against all kinds of solvents and alkalis, dilute mineral acids, non-acidic monomers, crude oil, fuels and other chemicals.

Epoxy Ceramic Primer/ Coating

XF3211

Polyamine

Using ceramic particles in the formulation of this product has led to the production of coating with excellent wear and mechanical resistance. Another advantage of this coating is the possibility of application in high thickness up to 800 microns.

Solvent-free Epoxy Primer / Coating

XF3201

Polyamine

This self-primer product is solvent-free and is suitable for immersion service in salt and fresh water and chemicals. It has been designed for the protection of storage tanks and buried pipelines where durability is required. It can be applied in high thicknesses (up to 800 microns) as a single layer. The features of this product include: excellent resistance to cathodic disbanding, excellent adhesion to steel surfaces and fusion bond epoxy (FBE), excellent chemical, abrasion and impact resistance, good wetting properties and low water permeability.